FujiFilm A470 - Manual (Page 44)

87
Viewing
Images
6
86
5.2 INSTALLATION ON A Mac OS X
10 The “FinePixViewer installation completed” message dialog appears. Then click exit button and
close it.
● ! When Safari is used as the Web browser, a message may be displayed and the CD-ROM may not be removed. If
this happens, click the Safari icon in the Dock to make Safari the active application and then select “Quit Safari” in
the “Safari” menu to shut down Safari.
11 Launch “Image Capture” from the “Applications” folder.
12 Change the Image Capture settings.
Select “Preferences...” from the “Image Capture”
menu.
14 Select “FPVBridge” from “FinePixViewer” folder in
the “Applications” folder and click the [Open] button.
15 Select “Quit Image Capture” menu in the “Image Capture” menu.
8 The “FinePixInstallOSX” window appears.
Click the [Install] button to install FinePixViewer and RAW FILE CONVERTER LE.
9 The ImageMixer VCD2 LE for FinePix installer automatically starts up and a window showing
the installation progress appears (Installation may take several minutes).
13 Select “Other...” from “When a camera is connected, open”.
6.1 CAMERA CONNECTION
6
Viewing Images
1
DC IN 5V socket
A/V OUT
(Audio / Visual output)
socket A/V OUT
(Audio / Visual output)
socket A/V OUT
(Audio / Visual output)
socket
6.1.2 Connecting to a TV
Turn off the camera and TV. Plug the A/V cable
(included) into the “A/V OUT” (Audio / Visual
output) socket.
● ! Plug the A/V cable (included) and the AC power adapter
correctly and push them in each terminal.
● ! When there is a power outlet available, connect the AC
Power Adapter AC-5VX (sold separately).
2
Video (yellow)
Audio (white)
To terminals
Plug the other end of the cable into the audio /
video input socket on the TV. Then turn the camera
and TV on and take pictures or play back images
normally.
● ! When connecting the A/V cable (included) to TV, the LCD
monitor is turned off. However, during movie recording, movie
images appear on the LCD monitor. The movie images
cannot be shown on a TV.
● ! Refer to the instructions provided with your TV for more
information on audio/video input for your TV.
● ! The image quality for movie playback is lower than for still
images.
Check that the camera is off. Plug the AC power
adapter connector into the “DC IN 5V” socket and
then plug the AC power adapter into the power
outlet.
● ! The socket-outlet shall be installed near the equipment and
shall be easily accessible.
● ! The shape of the plug and socket-outlet depends on the
country of use.
● ! See P.102 for notes on using the AC power adapter.
6.1.1 Using the AC power adapter
Always use a FUJIFILM AC Power Adapter AC-5VX (sold separately) ( ➡P.99).
Use the AC power adapter to prevent losing power at inconvenient times, such as when
downloading photographed images to your PC. You can take pictures and play back images without
worrying about depleting the battery.
● ! Only connect or disconnect the AC power adapter when the camera is off.
Connecting or disconnecting the AC power adapter while the camera is turned on temporarily interrupts the power supply
to the camera, so that images or movies being shot at the time are not recorded. Failing to turn the camera off first can
also result in damage to the xD-Picture Card or malfunctions during PC connection.
DC IN 5V socket