FujiFilm A470 - Manual (Page 42)

83
Software
Installation
5
82
1 Install FinePixViewer as instructed in the Quick start guide.
2 Install DirectX as directed by the on-screen instructions and then restart your PC. If the latest
version of DirectX is already installed on your PC, this installation is not performed.
● ! If the latest version is already installed, this window does not appear.
● ! Do not remove the CD-ROM during this procedure.
4 After restarting the PC, a message appears stating “Installation of the FinePixViewer has been
completed”.
3 After restarting, the USB Video Class Driver would
be installed.
● ! If the latest version is already installed, this window does not
appear.
● ! The driver is only installed on Windows XP SP1.
Do not connect the camera to your PC until the software installation is completed.
◆ Launching the installer manually ◆
1 Double-click the “My Computer” icon.
✽ Windows XP users should click “My Computer” in the “Start” menu.
2 Right-click “FINEPIX” (CD-ROM drive) in the “My Computer” window and select “Open”.
3 Double-click “SETUP” or “SETUP.exe” in the CD-ROM window.
◆
Installing other applications
◆
You may see messages for installing ImageMixer VCD2 LE for FinePix. Install this application as
directed by the on-screen instructions.
✽ The way file names are displayed differs as described below depending on your PC settings.
i File extensions (3-letter suffixes indicating the file type) may be shown or hidden. (e.g. Setup.exe or Setup)
i Text may be shown normally or all in uppercase (e.g. Setup or SETUP).
Pre-installation checklist
To run this software, you must have the hardware and software described below. Check your
system before you begin the installation.
✽1 Models with one of the above operating systems pre-installed.
✽2 When you install the software, login using a system administrator account (e.g. “Administrator”).
✽3 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet
connection.
Operating System ✽1
CPU
Windows 98 (including the Second Edition)
Windows Millennium Edition (Windows Me)
Windows 2000 Professional
✽2
Windows XP Home Edition ✽2
Windows XP Professional ✽2
200 MHz Pentium minimum
RAM 64 MB minimum
Hard disk space Amount required for installation: 450 MB minimum
Amount required for operation: 600 MB minimum
(When using ImageMixer VCD2 LE for FinePix: 2 GB or better)
Display 800 × 600 pixels or better, 16-bit color or better
(When using ImageMixer VCD2 LE for FinePix: 1024 × 768 or better)
Internet connection ✽3 i To use the FinePix Internet Service or mail attachment function:
An Internet connection or e-mail transmission software is needed
i Connection speed: 56 k or better recommended
Operating System
CPU
Windows XP
2 GHz Pentium 4 or better recommended
RAM 512 MB or better recommended
Hard disk space 2 GB or better
Display 1024 × 768 pixels or better, Highest (32 bit)
Internet connection Broadband (ADSL, FTTH, CATV, etc.)
5.1 INSTALLATION ON A Windows PC
5 Software
Installation
◆
Notes
◆
i Connect the camera directly to the PC using the USB cable (included). The software may not operate
correctly when you use an extension cable or connect the camera via a USB hub.
i When your PC has more than one USB port, the camera can be connected to either port.
i Push the USB connector fully into the socket to ensure that it is securely connected. The software
may not operate correctly if the connection is faulty.
i Additional USB interface board is not guaranteed.
i Windows 95 and Windows NT cannot be used.
i Operation is not guaranteed on home-built PCs or on PCs running updated operating system
software.
i When you reinstall or remove FinePixViewer, the Internet menu and your user ID and password for
the FinePix Internet Service are deleted from your PC. Click the [Register now] button, enter your
registered user ID and password and download the menu again.
■ Recommended system