FieldServer FS-8704-14 - Manual (Page 13)

FS-8704-14 EtherNet/IP Manual Page 13 of 31
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
Example
// Server Side Nodes
Nodes
Node_Name , Protocol
EIP_01 , EtherNet/IP
6.3 Server Side Map Descriptor
6.3.1 FieldServer Specific Map Descriptor Parameters
Column Title Function Legal Values
Map_Descriptor_Name Name of this Map Descriptor
Up to 32 alphanumeric
characters
Data_Array_Name
Name of Data Array where data is to be stored in the
FieldServer One of the Data Array names
from Section 4
Data_Array_Offset Starting location in Data Array
0 to (Data_Array_Length -1)
as specified in Section 4.
Function Function of Server Map Descriptor Passive
Server_Hold_Timeout*
Specifies the length of time that the FieldServer will
reserve the Server side connection while waiting for
the Client side to update data in Data Array (if
necessary)
>1.0s
6.3.2 Server Specific Map Descriptor Parameters – Unconnected Messages
Column Title Function Legal Values
EIP_Service The action to be performed. Get_Attrib, Set_Attrib
EIP_Class Class to be served.
One of the classes
supported by the driver. .
Refer to Appendix A.4
EIP_Attribute Attribute associated with the class served.
See particular attributes
of each class. Refer to
Appendix A.4
Length
Number of data elements to be mapped. If the number of data
elements exceeds the Map Descriptor length, the list of data
elements will be truncated and an error message will be printed
once per Map Descriptor. Refer to Appendix D for further
information.
For any given Map
Descriptor there can be
200 Floats, 400 Integers or
800 Bytes
Address Instance of the class to be served.
Depends on the
supported instances for
each class.