Fluke NetDAQ 2645A User Manual

Page 288

Text mode
Original mode

2640A/2645A NetDAQ

Users Manual

I-26

Select Setup | Host Name. Enter the host name assigned by your network
administrator for this host computer. Click OK.

Select Setup | Domain Name. Enter the domain name assigned by your
network administrator for this host computer. Click OK.

Select Setup | Ethernet Type and verify that Ethernet/DIX is selected. Click
OK.

10.

Check the Custom window for a summary of your parameters (the example
below is typical). Repeat Steps 4 to 9 as required to make changes. The
Physical Address (host computer Ethernet Adapter interface address) is
entered automatically when the computer is rebooted.

This manual is related to the following products:

NetDAQ 2640A