Fluke DSP-2000 User Manual
Fluke Hardware
This manual is related to the following products:
Table of contents
Document Outline
- DSP-100/2000 LAN CableMeter Cable Analyzer Users Manual
- 1. Introduction
- 2. Getting Started
- Safety and Operational Information
- Quick Start
- Quick Configuration
- Results within Accuracy Range
- Autotest on Twisted Pair Cable
- Autotest on Coaxial Cable
- Main Unit Features
- Remote Features
- Strap and Bail
- Rotary Switch
- Turning On the Test Tool
- Configuring the Test Tool
- Controlling the Backlight
- Adjusting the Display Contrast
- Selecting a Power Line Filter Frequency
- Selecting a Test Standard and Cable Type
- Selecting an Average Cable Temperature
- Selecting a Conduit Setting
- Selecting a Length Unit
- Selecting a Numeric Format
- Setting the Date and Time
- Setting the Power-Down Timer
- Enabling or Disabling the Audible Tones
- Remote Lights, Messages, and Audible Tones
- Remote End Testing
- Remote Communication Error
- Battery Status
- Battery Status Display
- 3. Autotest
- 4. Running Individual Tests
- Single Tests for Twisted Pair Cable
- Scanning Function
- When to Use a Remote Unit
- The TDX Analyzer
- The TDR Test
- Single Test Results for Twisted Pair Cable
- Single Tests for Coaxial Cable
- Monitoring Network Activity
- Identifying Hub Port Connections
- Monitoring Impulse Noise
- Determining Hub Port Capabilities (Model DSP-2000)
- Using the Tone Generator (Model DSP-2000)
- 5. Viewing and Printing Saved Reports
- 6. Calibrations and Custom Test Standards
- 7. Basic Cable Testing
- 8. Maintenance and Specifications
- Maintenance
- If the Test Tool Fails
- Specifications
- Service Center Calibration Period
- Self-Calibration Period
- Compatibility with Remote Units
- Cable Types Tested
- Test Standards
- Time for Autotest
- Characteristic Impedance
- Length Test
- Propagation Delay Test
- DC Loop Resistance
- Attenuation
- NEXT
- TDX( Analyzer Specifications for Cables <100m (328 ft)
- TDR Specifications for Cables <100m (328 ft)
- Return Loss
- Impulse Noise
- Model DSP-100 LAN Traffic
- Model DSP-2000 LAN Traffic
- Serial Interface
- PC Interface Cable
- Power
- Environmental Requirements
- Input Ratings
- Certifications
- Memory
- Dimensions
- Weight
- Display
- RJ45 Connector
- Warranty
- Appendices
- Appendix A Using DSP-LINK
- Appendix B Glossary
- Appendix C Tests Run per Test Standard During an Autotest
- Index