For use with kühl, And kühl, Kühl remote control – Friedrich KUHL R-410A User Manual

Page 78

Replacement Remote Control Configuration Instructions

For Use with Kühl

(cool only models)

and Kühl +

(cool & heat models)

Contents:

• Remote

Control

with

Holder

• (2)

AAA-batteries

• Instruction

Sheet

ATTENTION! – You May Need to Configure The Replacement Remote Control

Please read instructions completely before attempting configuration of the Remote Control. Failure to
do so could result in the Remote Control not being able to operate the Air Conditioning Unit properly.

Step 1. A. Locate the Model # of your Air Conditioner.
B. Identify the prefix (First 2 Letters) of your unit’s model #.
C. Look at the chart below and in it, find the prefix of your AC unit’s model #.
D. Note the Option # Code (OPT#) next to it and the required action. The unit’s

display is supposed to show this OPT# Code.

Model Prefix

Option Code

Required Action

SS, SM

OPT 1

None –

Remote Control configured for use with air conditioner

OPT 2

Perform Steps 2 - 5

YS, YM, YL, ES, EM, EL

OPT 3

Perform Steps 2 - 5

Step 2.

Point the Remote Control at Air Conditioning Unit and then press the Remote Control’s

POWER

Key once to illuminate the Air Conditioning Unit’s display.

Step 3.

Once the display on the Air Conditioning Unit is illuminated, check the Option Code

number

(OPT#) shown in the display and ensure it matches the OPT# code for your unit

as per the chart above.

Air Conditioner Unit’s Display

(see example below Fig 1)

OPT1

OPT2

OPT3 Displayed example

Figure 1

Kühl Remote Control