FUJITSU FM3 32-Bit Microcontroller MB9B300A - Manual (Page 42)

AN706-00044-1v0-E
- Open the Device Manager (located in "Control Panel¥System" then select the
"Hardware" tab and click "Device Manger") and select "View > Devices by
Connection", the device appears as a "USB Serial Converter" with an additional
COM port with the label "USB Serial Port" (Figure 3-13). If the device is based on
the FT2232, two ports will be available from a composite USB device.
Figure 6-13
- In the case of the FT2232, port A of the FT2232 will be installed as COMX and port B
will be installed as COMX+1 where COMX is the first available COM port number.
Figure 6-14
41