Furuno GP-1610CF - Manual (Page 10)

10
Setting Destination
When you set a destination, this unit computes the range, bearing and course to the destination.
To display your destination on the screen select a small display range or scale. To set as destina-
tion a point which is 20 nm from your harbor do the following:
50k
0
50
100
150
200
CSE 180.0° SPD 0.0kt 2D
DEP 110 m TMP - - .-°C 14:40
POS 34°26.345'N
135°41.232'E
Press until position
for destination
appears.
50k
0
50
100
150
200
CSE 180.0° SPD 0.0 kt 2D
DEP 110 m TMP - - .-°C 14:53
POS 34°26.345'N
135°41.232'E
SELECT GOTO MODE
Set point as
destination.
WPT List
EVENT List
ROUTE List
Cursor/Route plan
Shrink display
range or scale.
If "Cursor/Route plan"
is not in reverse video,
press
▼ to do so.
ENT: Sel CLR: Release
ESC: Cancel
2 Press the GOTO key.
1 Press the ZOOM OUT key.
Destination
point
MENU
ESC
NU/CU
ENT
SNDR
1
PLTR
6
AUTO
2
EVENT
MOB 7
WPT
3
GOTO
8
ZOOM
OUT 9
CNTR
5
CLR
TONE
POWER
ZOOM
IN 4
CURS
0
2
1