Adding a new cue point to the cue point list, Deleting a cue point, Editing cue point data – Fostex DV824 User Manual

Page 58

DVD Multitrack Recorder DV824

Deleting a cue point

To delete an unnecessary cue point, select "Delete" using the [MENU] dial and press the
[ENTER/YES] key ("Sure?" flashes).
Press the [ENTER/YES] key again to delete the cue point from the list.
The display returns to the Home screen.

After deleting a cue point, the label column of the cue point becomes empty

while the time value column shows "--h--m--s--f--".

Adding a new cue point to the cue point list

While the CUE LIST screen is shown, you can add a new cue point to the list.
Select a desired cue number which does not hold data.
By pressing the [ENTER/YES] key, time data of the current recorder position is
set as the cue point.

In the example below, Cue 05 is set when the current recorder position is "01h
58m 20s **f ** sf" (LTC time).

Editing cue point data

To edit cue point data, use the [MENU] dial to select "Position" while "Label" is flashing
and press the [ENTER/YES] key.
The subframe value of the current time data flashes, showing that you can now edit it.

Regardless of the cursor position, pressing the [CLEAR/

FALSE START

] key resets

the time data to "00h00m00s00f".

Select the edit point using the [SKIP/CURSOR

] key, edit the value using the

[MENU] dial, and confirm the setting by pressing the [ENTER/YES] key (the display
returns to the CUE LIST screen).

flashing