Fostex MR-8CD - Manual (Page 98)

98
MR-8HD/CD Owner’s Manual (Song management)
The following describes how to select the desired song from the disk when more than one song
is created on the disk. You can also create a new song by the similar procedure. See "
Basic
operations " (page 31) for details about how to create a new song.
1) While the recorder is stopped, press the
[MENU/ENTER] knob to enter the menu mode.
The display now shows the first page of the
menu selection screen, where "
Back " is
highlighted initially (selecting " Back "
returns to the previous screen).
2) Rotate the [MENU/ENTER] knob to select "Song ",
and press the [MENU/ENTER] knob.
The display now shows the song menu screen,
where "
Back " is highlighted.
3) Rotate the [MENU/ENTER] knob to select
"Select Song " and press the [MENU/ENTER]
knob.
The display now shows the song list screen.
The screen example above shows that four
songs are currently created on the hard disk.
The song list is shown on a single page.
When more songs are created, the song list
screen has more than one page, and you can
scroll the list by rotating the [
MENU/ENTER ]
knob.
"
- - - :(New Song) " at the bottom of the screen is
used when you create a new song.
4) Rotate the [MENU/ENTER] knob to select the
desired song number/song name, and press the
[MENU/ENTER] knob.
The display returns to the song menu screen,
where "
Select Song " is highlighted.
5) Press the [STOP] key to exit the menu mode.
The display shows the home screen of the
selected song.
Selecting the desired song