Fostex MR-8CD - Manual (Page 120)

120
MR-8HD/CD Owner’s Manual (Part editing)
9) Rotate the [MENU/ENTER] knob to move the
cursor to "[ENTER]" on the screen, and press the
[MENU/ENTER] knob.
The display shows " Please Wait ", immediately
followed by " Completed " when the MR-8HD/
CD completes the move operation.
: If you are not satisfied with the re-
sult, press the [ UNDO/REDO ] key to undo the
operation (see page 111).
10) Press the [MENU/ENTER] knob.
The display now returns to the part edit menu
screen, where “
Move Part ” is highlighted.
11) Press the [STOP] key to exit the menu mode.
8) Rotate the [MENU/ENTER] knob to select the
destination track(s), and press the
[MENU/ENTER] knob.
The display returns to the screen where
"
Dest. Track = * " is highlighted.
If you want to cancel the move operation, move
the cursor to "
[CANCEL] " on the screen, and
press the [ MENU/ENTER ] knob.
Flashing
Flashing
Flashing