Fostex MR-8CD - Manual (Page 115)

115
MR-8HD/CD Owner’s Manual (Part editing)
10) Press the [MENU/ENTER] knob.
The display now returns to the part edit menu
screen, where “
Copy-Paste Part ” is highlighted.
11) Press the [STOP] key to exit the menu mode.
6) Rotate the [MENU/ENTER] knob to select "Source
Track = *", and press the [MENU/ENTER] knob.
The display now shows the screen for
selecting the copy source track(s). You can
select the copy source track(s) by rotating the
[
MENU/ENTER ] knob. The available options are:
• 1 through 8 (mono track)
• 1/2, 3/4, 5/6 and 7/8 (stereo tracks)
7) Rotate the [MENU/ENTER] knob to select the source
track(s) to be copied, and press the [MENU/ENTER]
knob.
You can select the destination track(s) by
rotating the [
MENU/ENTER ] knob.
The available options are:
• 1 through 8 (mono track)
• 1/2, 3/4, 5/6 and 7/8 (stereo tracks)
: You cannot select the same track(s)
for the copy source and destination.
: If you are not satisfied with the re-
sult, press the [ UNDO/REDO ] key to undo the
operation (see page 111).
5) Rotate the [MENU/ENTER] knob to select "Copy-
PastePart ", and press the [MENU/ENTER] knob.
The display now shows the screen for
selecting the source track(s) and destination
track(s) of copy/paste. "
Back " is initially
highlighted.
9) Rotate the [MENU/ENTER] knob to move the
cursor to "[ENTER]" at the bottom of the screen,
then press the [MENU/ENTER] knob.
The display shows " Please Wait ", immediately
followed by " Completed " when the MR-8HD/
CD completes the copy/paste operation.
To cancel the copy/paste operation, move the
cursor to "
[CANCEL] " at the bottom of the
screen, and press the [ MENU/ENTER ] knob.
8) Rotate the [MENU/ENTER] knob to select the
destination track(s), and press the [MENU/ENTER]
knob.
The display returns to the previous screen.
Flashing
Flashing
Flashing
Flashing