Auto punch in/out, Mr-8hd/cd, Setting the punch-in and punch-out points – Fostex MR-8CD User Manual
Page 54: Owner’s manual (punch in/out)
MR-8HD/CD
Owner’s Manual (Punch in/out)
54
By setting the punch-in and punch-out points in advance, the recorder automatically makes
punch in/out recording for you. You can rehearse punch in/out recording as many times you
like.
Setting the punch-in and punch-out points
3)
When the recorder reaches at the point where
you want to make punching out, press the
[LOCATE B/OUT] key while holding down the
[STORE] key.
The display briefly shows "
Store LOCATE B
" and
the time data when you press the
[
LOCATE B/OUT
] key is set as the punch-out
point.
4)
Stop the recorder after setting the punch-in and
punch-out points, and rewind the recorder to the
beginning of the song (or to a point before the
point where you want to make punching in).
The punch-in and punch-out
points you set also can be used for the
locate function, playback by the play
mode and part editing (see pages 45 and
111).
If you are not satisfied with the
punch-in or punch-out point you set, sim-
ply redo the operation above. The new time
data overwrites the previous one.
1)
Start playback from the beginning of the song
(or from a point before the point where you want
to make punching in) by pressing the [PLAY] key.
2)
When the recorder reaches at the point where
you want to make punching in, press the
[LOCATE A/IN] key while holding down the
[STORE] key.
The display briefly shows "
Store LOCATE A
" and
the time data when you press the
[
LOCATE A/IN
] key is set as the punch-in point.
You cannot make punch-in/out recording
on a song which is protected. Release the song pro-
tection before making punch-in/out recording.
Punch-in point
Punch-out point
Part replaced with a new recording
To rewind the recorder to the be-
ginning of the song after setting the
punch-out point, press the [
REWIND
] key
while holding down the [
STOP
] key.
To locate before the punch-in point, carry
out the following.
(1)
While the recorder is stopped, press
the [LOCATE A/IN] key.
The recorder immediately locates to
the punch-in point and stops.
(2)
Press the [REWIND] key to move back
the recorder and press the [STOP] key
at the desired point.
B / OUT
A / IN
LOCATE
STORE
PLAY MODE
AUTO PUNCH
UNDO/REDO
PQR6
STU7
VWX8
YZ9
+-_0
DELETE
B / OUT
A / IN
LOCATE
STORE
PLAY MODE
AUTO PUNCH
UNDO/REDO
PQR6
STU7
VWX8
YZ9
+-_0
DELETE
You can set the punch-in and punch-out points on-the-fly while playing back the recorder (as
well as you can set them while the recorder is stopped at the desired position).
Auto punch in/out