Fostex MR-8CD - Manual (Page 109)

109
MR-8HD/CD Owner’s Manual (Track editing)
4) Rotate the [MENU/ENTER] knob to select
"Change Track ", and press the [MENU/ENTER]
knob.
5) Rotate the [MENU/ENTER] knob to select
"Source Track = *", and press the [MENU/ENTER]
knob.
You can now select the desired exchange source
track(s) by rotating the [
MENU/ENTER ] knob.
The available options are:
• 1 through 8 (mono track)
• 1/2, 3/4, 5/6 and 7/8 (stereo tracks)
6) Rotate the [MENU/ENTER] knob to select the
source track(s), and press the [MENU/ENTER] knob.
You can now select the desired destination
track(s).
: If you want to cancel the exchange op-
eration, move the cursor to " [CANCEL] " on the
screen, and press the [ MENU/ENTER ] knob.
: You cannot select the same track(s)
for the exchange source and destination.
8) Rotate the [MENU/ENTER] knob to move the
cursor to "[ENTER]" on the screen, and press the
[MENU/ENTER] knob.
The display shows " Please Wait ", immediately
followed by " Completed " when the MR-8HD/
CD completes the exchange operation.
You can select the same number of tracks as
the exchange source track(s). For example, if
you select a mono track for the exchange
source, you can only select a mono track for
the exchange destination.
The display now shows the screen for select-
ing the source track(s) and destination track(s)
of the exchange operation.
"
Source Track " selects the exchange source
track(s), while " Dest. Track " selects the exchange
destination track(s).
7) Rotate the [MENU/ENTER] knob to select the
destination track(s), and press the
[MENU/ENTER] knob.
“ Dest. Track = * ” is now highlighted on the screen.
Flashing
Flashing
Flashing
Flashing