FUJITSU Semiconductor - Manual (Page 83)

82
8-bit Proprietary F 2 MC-8L Family
Support Tools
■ Serial on board programmer
The serial on board programming (Fujitsu standard) in FLASH memory of the F 2 MC-16LX family or OTPROM of the
F 2 MC-8L family is supported as the following programmer.
1. AF220/AF210/AF120/AF110
(FLASH microcontroller programmer ) : Yokogawa Digital Computer
(1)System configuration
(2) Product configuration
Contact for detailes : Yokogawa Digital Computer Corporation
Although AF200 (Yokogawa Digital Computer) has ceased, the conventional system configuration is also possible for serial onboard
writing (a standard for FUJITSU) .
(3) OTPROM microcontroller for programming
*1 : In control module FF004A, AF200 (cereal programmer of an old version) is available.
*2 : Needs optional adapter AZ264 (3V conversion adaptet).
Product name Part number Description
Flash Microcontroller Program-
mer Main Unit
AF220/AC4P
with Ethernet(10Base-T) Interface
/100V to 220V Power supply adaptor
AF210/AC4P
Basic Model
/100V to 220V Power supply adaptor
AF120/AC4P
Single Operation Model with Ethernet Interface
/100V to 220V Power supply adaptor
AF110/AC4P
Single Operation Model
/100V to 220V Power supply adaptor
Host Interface Cable AZ221 Writer exclusive use. RS232C cable for PC/AT
Standard Target Probe AZ210 Standard Target Probe (a) : 1 m
Control Modules FF002 or FF004A Controll modules for F 2 MC-8L OTP microcontroller made by Fujitsu.
Remote Controller AZ290 Remote Controller
Memory card
/P2 2 MB PC Card
/P4 4 MB PC Card
OTPROM microcontroller
(OTPROM size)
Control Module Status
MB89P215 (16 KB) FF004A Supported * 1
MB89F538/L (48 KB) FF201 Supported * 2
MB89P558A (48 KB) FF002 Supported
MB89P585B/BW (16 KB) FF004A Supported * 1
MB89P935B (16 KB) FF004A Supported * 1
F 2 MC-8L/16LX
user’s systemr
Flash Microcomputer
Programmer Main Unit
+
Control Module
It is stand-alone and operable.
Host interface cable
(AZ221)
Standard Target Probe
(AZ210)
RS232C
CLK synchronous
serial