FUJITSU Semiconductor - Manual (Page 253)

252
32-bit FR Family
Support Tools
■ FR60Lite Family Evaluation Board (BBF2001) : Sun Hayato
This is an evaluation board made by Sunhayato corp. in cor-
respondence with Fujitsu FR families. It can be used to verify
the operating status of F
2 MC-16LX families before they are
actually embedded into a customer's system. As a conse-
quence, development efficiency is accelerated.
This board consists of a Sun Hayato mainboard and a Sun
Hayato daughterboard. By changing the Sun Hayato daugh-
terboard, it can be used for debugging with the (ICE) tool
combined with the emulator debugger, evaluating a micro-
computer with built-in flash memory and a serial program-
ming. The board made by Sun Hayato is adaptable to various
series by changing the daughterboard, while the mainboard
is common to each part.
• Evaluation board configuration
Sun Hayato main board (BBF2001-MB01)
IC socket (clam shell type) daugh-
ter board (BBF2001-FR100CAN2-
NB)
BBF2001-MB01 (Main board
made by Sun Hayato)
BBF2001-FR100CAN2-NB
(NQPACK typr daughter board QFP-100)
Serial programming connector made by Yokogawa Digital Computer corp.
RS232 (DSUB9pin) connector (with a built-in RS232C driver)
DIP switch for various settings
Signal check pin for all terminals
Power connector
Main/sub oscillator clock socket
Sun Hayato daughter
board connectors
Reset button
LED for port output checking
Various kinds of Jumper
switches
Variable resistor for changing analog input voltage
Sun Hayato mainboard
connectors
DIP switch
for various
settings
CAN communication
connector
(DSUB 9 pin)
(built-in CAN driver)
Various kinds of Jumper switches