FUJITSU Semiconductor - Manual (Page 173)

172
16-bit Proprietary F 2 MC-16L/16LX/16F Family
Support Tools
■ MB2000 : CAN FLASH EVALUATION BOARD
The Flash/CAN100 board was developed, in order to allow a fast software design start for customers wishing to use
Fujitsu Flash and / or CAN MCUs in the 100-pin QFP package. Since Fujitsu in-circuit emulators require a target sys-
tem that provides Vcc and Gnd, as well as an oscillation circuit, that enables customers to start development or evalu-
ation work straight away without having to wait for their own target hardware.
Features
• 100-pin socket adaptor for device or emulator connection
• On-board regulator allows for a 7-14V unstabilised external DC power supply
• 5V and 3.7V internal power supply available for emulator
• Two high-speed CAN drivers
• RS232 interface
• All MCU pins brought out twice to external connectors
• Optional sub-clock
• RST, HST push-button
• 8 test LEDs
• External reset via RS232
The Flash/CAN100 is supplied with the MB90F598 single-CAN and 128 KByte flash microcontroller. It is capable of
supporting all of the following device types:
• MB90540 = MB90V540, MB90F543, MB90543
• MB90545 = MB90V540, MB90F549, MB90F548, MB90548
• MB90550A = MB90V550A, MB90F553A, MB90553A
• MB90580 = MB90V580, MB90F583B, MB90583B
• MB90590 = MB90V590, MB90F594A,MB90594, MB90F591, MB90591
• MB90595 = MB90V595, MB90F598, MB90598
The order code for the kit is FLASH-CAN2-100P-M06 and it is delivered with:
• The Flash/CAN100 board itself
• Two 50-pin socket connectors
• Power supply connector
• MB90F598 - 128kB Flash microcontrollers
• 11 Jumpers
• 1 socket adapter cover
• English documentation