Bit proprietary f, Mc-8l family, Support tools – FUJITSU Semiconductor User Manual

Page 72

8-bit Proprietary F

MC-8L Family

Support Tools

MC-8LF

amily

Support tools

*1 : Includes one Q-pack for QFP-80 (model : TQPACK080RA: made by Tokyo Eletech Ltd.)

Note : Care is required in printed circuit board pattern design because the position of the board connector part (the flat section

at the pin tips) of the Q-pack differs from the mass production product package (the Q-pack pins are shifted a few milli-
meters inwards).

Includes one Q-socket for QFP-80 (model : TQSOCKET080RAG: made by Tokyo Eletech Ltd.)

*2 : Includes one Q-pack for QFP-64 (model : TQPACK064RZ: made by Tokyo Eletech Ltd.)

Note : Care is required in printed circuit board pattern design because the position of the board connector part (the flat section

at the pin tips) of the Q-pack differs from the mass production product package (the Q-pack pins are shifted a few milli-
meters inwards).

Includes one Q-socket for QFP-64 (model : TQSOCKET064RZG: made by Tokyo Eletech Ltd.)

*3 : Includes one IC socket for SH-DIP-64 (model : IC83-64075-GS4: made by Yamaichi Electronics Inc.)

*4 : Includes one Q-pack for LQFP-64 (model : TQPACK064SD : made by Tokyo Eletech Ltd.)

Note : Care is required in printed circuit board pattern design because the size of the foot pattern of the Q-pack differs from the

mass production product package (the Q-pack pins are shifted a few millimeters inwards).

Includes one Q-socket for LQFP-64 (model : TQSOCKET064SDW : made by Tokyo Eletech Ltd.)

*5 : Includes one Q-pack for QFP-64 (model : TQPACK064SA : made by Tokyo Eletech Ltd.)

Includes one Q-socket for QFP-64 (model : TQSOCKET064SAW : made by Tokyo Eletech Ltd.)

Note : Care is required in printed circuit board pattern design because the size of the foot pattern of the Q-pack differs from

the mass production product package (the Q-pack pins are shifted a few millimeters inwards).

*6 : Interchangeability to MB2114-505.

Name

Part number

Remarks

Main unit

MB2141B

For the F

MC-8L family

Power supply voltage : 100 V or 200 V.
Host I/F : RS-232C(115 Kbps) ) , LAN (10BASE-T)
Dimensions : W210

D297

H77 mm

Weight : 2.9 kg
Includes : manual

Emulation pod *

MB2144-508

For the F

MC-8L family

Dimensions :158mm(with)

126mm(depth)

38mm(height),

Weight : 0.5kg
Includes : simple target (MB89T625) , manual

Piggyback/evalua-
tion (PV) probe
cable

MB2144-201

For DIP-28, piggyback/evaluation package: MDIP-64C-P02

MB2144-202

For LCC-32 rectangular, piggyback/evaluation package: MQP-64C-P01,
MQP-80C-P01, MQP-100C-P02

MB2144-203

For LCC-32 square, piggyback/evaluation package: MQP-48C-P01,
MQP-100C-P02

One-time evalua-
tion probe cable

MB2144-210A
or
MB2144-220

Use in conjunction with the probe header for each product type.

One-time evalua-
tion probe header

MB2144-211-01A *

For the MB89860 series (QFP-80), standard options are mounted on MB89P867

MB2144-212-01A *

For the MB89850 series (SH-DIP-64), standard options are mounted on MB89P857

MB2144-214-01A *

For the MB89810A series (QFP-64), default options are mounted on MB89P817A

MB2144-215-01 *

For the MB89660 series (QFP-64), default options are mounted on MB89P665

MB2144-216-01 *

For the MB89660 series (SH-DIP-64), default options are mounted on MB89P665

MB2144-217-01 *

For the MB89P585B (LQFP-64), default options are mounted on MB89P585B

MB2144-218-01 *

For the MB89R905 (QFP-48) ,FPT-48P-M16 (0.8 mm pitch,

12 mm

)

MB2144-224-01 *

For the MB89P589B (LQFP-64), default options are mounted on MB89P589B

MB2144-225-01 *

For the MB89P585BW (LQFP-64) , default options are mounted on MB89P585BW

MB2144-226-01 *

For the MB89R907A (QFP-48), FPT-48P-M13 (0.8 mm pitch,

10 mm

)