FUJITSU Semiconductor - Manual (Page 177)

176
16-bit Proprietary F 2 MC-16L/16LX/16F Family
Support Tools
■ F 2 MC-16LX Family Evaluation Board (BBF2001) : Sun Hayato
This is an evaluation board made by Sunhayato corp. in cor-
respondence with Fujitsu F
2 MC-16LX families. It can be
used to verify the operating status of F 2 MC-16LX families
before they are actually embedded into a customer's sys-
tem. As a consequence, development efficiency is acceler-
ated.
This board consists of a mainboard and a daughterboard.
By changing the daughterboard, it can be used for debug-
ging with the (ICE) tool combined with the emulator debug-
ger, evaluating a microcomputer with built-in flash memory
and a serial programming. The board is adaptable to various
series by changing the daughterboard, while the mainboard
is common to each part.
• Evaluation board configuration
• Product configuration
Main board
Main board (BBF2001-MB01) IC socket (clam shell type)
(BBF2001-100QF2-CB)
Part number Description
BBF2001-MB01
- Locating signal check pin to all terminals
- Capability of changing input voltage to analog input terminal (by variable resistor)
- Function of LED lightning for output port (P00 to P17)
- Evaluate the capability of communication between PC and microcomputer with UART
(mounted DSUB 9pin)
- Can be use the serial programmer made by FUJITSU
- Can be use the serial programmer made by Yokogawa Digital Computer corp.
- Can be use the main board for FR60Lite
BBF2001-MB01 (Main board)
BBF2001-100QF2-CB
(IC socket type daughter board)
Serial programming connector made by Yokogawa Digital Computer corp.
RS232 (DSUB9pin) connector (with a built-in RS232C driver)
DIP switch for various settings
Signal check pin for all terminals
Power connector
Main/sub oscillator clock socket
Daughter board connectors
Reset button
LED for terminal (P00 to P17) output checking
Various kinds of Jumper switches
Variable resistor for changing
analog input voltage
Mainboard connectors
IC socket
Switch for various settings