Furuno GP-1850DF - Manual (Page 44)

4-6
8P connector
to J8
A view
6P connector
to J7
J7
J8
Panel
Assembly
Connector
MAIN Board
14P0311B
Panel assembly
ANLG Board
14P0313B
A
Figure 4-8 Attaching chassis assembly
11.Reassemble the display unit.
Cover assembly
Binding screws
M3x10, 10 pcs.
(Torque: 0.74-0.78 N
•
m)
Nuts
(Torque: 0.74-0.78 N
•
m)
Nut
Washer
(Torque:
1.37-1.57 N
•
m)
Figure 4-9 Remounting the cover
Note : When reattaching the cover, confirm the following parts are attached.
• Inside of the cover : Shield gaskets, GN gasket (See Figure 4-10.)
• On ANLG Board : Connector gasket (See Figure 4-1.)