Furuno GP-1850DF - Manual (Page 30)

3-4
3.3 Antenna Height
1. Press the [MENU] key.
2. Press the software key labeled "GPS/DGPS/TD OPTIONS".
3. Press the software key labeled "GPS SETUP OPTIONS".
4. Select "ANT. HEIGHT" by the arrow key.
5. Press the software key labeled "EDIT" to display the following message.
ANT. HEIGHT
0 0 5 m
Figure 3-4 Antenna Height Display
6. Enter the height (3 digits) of the antenna above sea level using the numeric
keys.
If you enter wrong antenna height, press the software key labeled "CLEAR".
7. Press the [ENTER] key.
8. Press the [PLOT] key to return to finish.
3.4 Baud Rate Setting (GP-1850DF only)
This setting may not be done when AUTO MODE is selected.
1. Press the [MENU] key.
2. Press the software key labeled "GPS/DGPS/TD OPTIONS".
3. Press the software key labeled "DGPS SETUP OPTIONS" to display the fol-
lowing message.
s FORMAT NMEA 0183
VER 1.5
DGPS 3D
DGPS
OPTION
RETURN
DGPS MODE ON
BEACON FREQUENCY AUTO
s BEACON BAUD RATE AUTO
DGPS ALARM OFF
EDIT
Figure 3-5 DGPS Setup Options Display