Fostex MR-8MKII - Manual (Page 130)

130
MR-8mkII Owner’s Manual (Burning an audio CD)
2) Use the JOG dial to select "CD TOC>" and press
the [MENU/ENTER] key.
As with viewing the TOC after "CD burn"
operation, the display shows "Please Wait",
followed by TOC.
However, in this case, the remaining time is
shown as "00h 00m 00s", which means no
more tracks can be recorded.
1) Close the tray of the CD-R/RW drive (because
after finalizing the disc, the tray opens).
You can close the tray by pressing the eject
key or push the tray lightly.
: When you close the tray, the ac-
cess indicator starts flashing while the drive
is reading the disc. Therefore, do not carry
out the next operation until the drive stops
accessing and the access indicator gets un-
lit.
Viewing TOC after completing "CD Finalize"
3) After checking TOC, use the [STOP] key to exit
the menu mode.
The display returns to the Home screen.
: The following shows the screen ex-
ample when you burn multiple WAV files
and finalized. You can check the playing
time of each track as well as the disc re-
maining time. In this case, the remaining
time is also shown as "00h 00m 00s".
: You can also view the TOC of a
commercially available audio CD, as with
an audio CD you made using the MR-8mkII.
To do this, set an audio CD to the CD-R/
RW drive and carry out the same opera-
tion as described above using the "USB
HOST" menu in the MENU mode.
Note that you can view only the playing
time of each track. You cannot view track
titles.