Fostex MR-8MKII User Manual
Page 102
102
MR-8mkII Owner’s Manual (Track data editing)
9)
Press the [MENU/ENTER] key.
The display now returns to the track edit menu
screen, where “Change Track >” is highlighted.
10)
Press the [STOP] key to exit the menu mode.
If you are not satisfied with the re-
sult, press the [UNDO/REDO] key to undo
the operation (see page 95).
If you want to cancel the exchange
operation, move the cursor to "[CANCEL]"
on the screen, and press the [MENU/ENTER]
key.
You cannot select the same track(s)
for the exchange source and destination.
8)
Rotate the JOG dial to move the cursor to
"[ENTER]" on the screen, and press the
[MENU/ENTER] key.
The display shows "Please Wait", immediately
followed by "Completed" when the MR-8mkII
completes the exchange operation.
You can select the same number of tracks as
the exchange source track(s). For example, if
you select a mono track for the exchange
source, you can only select a mono track for
the exchange destination.
7)
Rotate the JOG dial to select the destination
track(s), and press the [MENU/ENTER] key.
“Dest. Track = *” is now highlighted on the
screen.
flashing