Fostex MR-8MKII User Manual
Page 100
100
MR-8mkII Owner’s Manual (Track data editing)
If you want to cancel the move opera-
tion, move the cursor to "[CANCEL]" on the
screen, and press the [MENU/ENTER] key.
9)
Press the [MENU/ENTER] key.
The display now returns to the track edit menu
screen, where “Move Track >” is highlighted.
10)
Press the [STOP] key to exit the menu mode.
If a destination track has recorded
data, moving data overwrites the previous
data.
If you are not satisfied with the re-
sult, press the [UNDO/REDO] key to undo
the operation (see page 95).
You cannot select the same track(s)
for the move source and destination.
You can select the same number of tracks as
the move source track(s). For example, if you
select a mono track for the move source, you
can only select a mono for the move destina-
tion.
8)
Rotate the JOG dial to move the cursor to
"[ENTER]" on the screen, and press the
[MENU/ENTER] key.
The display shows "Please Wait", immediately
followed by "Completed" when the MR-8mkII
completes the move operation.
7)
Rotate the JOG dial to select destination track(s),
and press the [MENU/ENTER] key.
“Dest. Track = *” is now highlighted on the
screen.
flashing