Furuno FA-150 - Manual (Page 25)

19
4. SET MMSI is selected; press the [ENT] key to display the SET MMSI window.
NAME:
C. SIN:
MMSI: 000000000
IMO NO: 000000000
QUIT [MENU]
[SET MMSI]
SET MMSI window
5. MMSI is selected; press the [ENT] key. By using the cursor pad, enter ship’s
MMSI (Maritime Mobile Service Identity) in nine digits. To set value, press ▲ or
▼
key and to change the digit, press ◄ or ► key.
6. Press the [ENT] key and the IMO NO is selected.
7. Press the [ENT] key and enter ship’s IMO number in nine digits. If the IMO
number has 7 digits, enter “0” twice followed by IMO number. If the ship has no
IMO number, enter nine zeroes.
8. Press the [ENT] key and the NAME is selected.
9. Press the [ENT] key and enter ship’s name, using up to 20 alphanumeric
characters.
10. Press the [ENT] key and the C. SIN is selected.
11. Press the [ENT] key and enter call sign, using up to seven alphanumeric
characters.
12. Press the [ENT] key.
13. Press the [MENU] key to save the settings.
Note:
If you enter incorrect data, do the procedure from step 1.