Setting and adjustment, 1 setting mmsi, imo no., name and call sign – Furuno FA-150 User Manual

Page 24

3. SETTING AND ADJUSTMENT

After installing the equipment, set up the own ship’s static information (MMSI, IMO

number, ship’s name, call sign, type of ship and GPS antenna position). Also, set

up the I/O ports.

3.1 Setting MMSI, IMO No., Name and Call Sign

1. Press the [MENU] key to open the main menu.

[MENU]

MSG

SENSOR STATUS
INTERNAL GPS
USER SETTINGS
INITIAL SETTINGS
CHANNEL SETTINGS
DIAGNOSTICS

2. Press ▼ on the cursor pad to choose INITIAL SETTINGS and press the [ENT]

key. The following password entry window appears.

[ENTER PASSWORD]

Password entry window

3. Enter the password. The INITIAL SETTINGS window appears. Note that the

password is known by only the FURUNO dealer.

[INITIAL SETTINGS]
SET MMSI
SET INT ANT POS.
SET EXT ANT POS.
SET SHIP TYPE
SET I/O PORT

QUIT [MENU]

SET MMSI

Note that if the password is wrong, “VIEW” is displayed in stead of “SET” in the
figure above.