FUJITSU MCP3130SS - Manual (Page 48)

Installation Requirements
3-6 C156-E228-02EN
Position after a cartridge is loaded
Bottom of
the frame
Position when loading a cartridge
Center of a cartridge when loaded
A-A Section
Below 3.3
Panel
Bel
o
w
7.
8
Figure 3.2 Outer dimensions (2 of 2)
Notes
1. Fujitsu recommends using the dimensions indicated by asterisks in the above
figure for the size of the panel opening.
2. If the specified dimensions are not used, the MO disks might be damaged
when a cartridge is loaded.