Furuno NATVET 1824C - Manual (Page 192)

7. CUSTOMIZING YOUR UNIT
7-31
3. Use the Trackball to select a location.
4. Press the EDIT soft key. The following display appears.
POSITION
WPT POSITION
SOG
STW
COG
BEARING
RANGE
DEPTH
TEMPERATURE
LOG TRIP
TIME TO GO
ETA
DATE
TIME
WIND
DISPLAY DATA
Nav data setup window
5. Select the data to display, then press the ENTER soft key or ENTER knob to register
your selection.
6. Press the RETURN soft key followed by the MENU key to close the menu.
7.9 Sounder Setup
This section shows you how to customize your network sounder to your liking. You can set
fish alarm sensitivity, fine tune sensors, etc.
7.9.1 System setup
1. Show the sounder display, then press the MENU key.
2. Press the SOUNDER SYSTEM SETUP soft key.
SYSTEM
SETUP 1
EDIT
SENSOR
SETUP
RETURN
FISH ALARM LEVEL MEDIUM
TRANSMISSION ON
TVG - HF 3
TVG - LF 3
ECHO OFFSET - HF +00
ECHO OFFSET - LF +00
BOTTOM LEVEL - HF +000
BOTTOM LEVEL - LF +000
KP PULSE INTERNAL
SMOOTHING SM3
TLL OUTPUT ON
NEXT
PAGE
SYSTEM
SETUP 2
EDIT
SENSOR
SETUP
PREV.
PAGE
STC - HF 00
STC - LF 00
FREQ. ADJ. - HF +00.0%
FREQ. ADJ. - LF +00.0%
TARGET ECHO NORMAL
Page 1 Page 2
Sounder system setup menu