7 navigator setup, 1 navigation data source, Hot page 1 – Furuno NATVET 1824C User Manual

Page 184

7. CUSTOMIZING YOUR UNIT

7-23

5. Rotate the

ENTER knob to select a main screen, then press the ENTER knob. For

example, select the radar display. Your choice is then shaded to show that is has been
selected.

Sub screen

HOT PAGE 1

RADAR

PLOTTER

SOUNDER

COMPASS

HIGHWAY

EXT

VIDEO

Hot page setup menu, SPLIT X 3 screen, sub screen selection

6. Rotate the

ENTER knob to select the screen to show at the top right 1/4 screen, then

press the

ENTER knob or the ENTER soft key.

7. Rotate the

ENTER knob to select the screen to show at the bottom right 1/4 screen,

then press

ENTER knob or the ENTER soft key.

Note: The SELECT WINDOW soft key functions to select the window to process.

8. Press the

MENU key to close the menu.

7.7 Navigator

Setup

This section provides the information necessary for selecting the type of navigator
connected to your plotter.

7.7.1 Navigation

data

source

The NAV SETUP menu mainly selects the source of
nav data. For GPS receiver other than the
GP-310B/320B, speed averaging and local time
offset (to use local time) are also available. Press the
MENU key followed by the SYSTEM
CONFIGURATION, NAV OPTION and NAV
SOURCE SETTINGS soft keys to display this menu.

NAV
SETUP

EDIT

RETURN

POSITION SOURCE

ALL

SPEED SOURCE

ETR

TEMPERATURE SOURCE

ETR

DE`PTH SOURCE

ETR

STW CALIBRATION

TEMP CALIBRATION

+0.0

DEPTH CALIBRATION

+0.0ft

WIND AVERAGING

5 minutes

WIND DIRECTION OFFSET

P0.0

WIND SPEED CALIBRATION