Fluke 434 - Manual (Page 101)

Tips and Maintenance
Troubleshooting
20
20-3
Optional Accessories.
Item Ordering Code
Advanced Functions for Fluke 433 (Interharmonics, Transients, Energy Usage,
Inrush Currents, Extra Memory). Fluke-433/AF
FlukeView Software for Fluke 433 SW43W (V3.0)
Upgrade Kit for Fluke 433 (Advanced Functions, FlukeView Software, Optical
Cable for USB model OC4USB) Fluke-433/UGK
Optical Isolated RS-232 Cable PM9080
Print Adapter for Parallel Printers PAC91
Optical Isolated Trigger Probe (For Fluke 434 to test energy meters)
AC Current Clamp 200 A (10 mV/A) and 20 A (100 mV/A) switcheable. i200s
AC Current Clamp 2000 A (1 mV/A) and 200 A (10 mV/A) switcheable, flexible. i2000flex
AC Current Clamp 500 A (1 mV/A). 80i-500s
AC Current Clamp 1000 A (1 mV/A), 100 A (10 mV/A), and 10 A (100 mV/A)
switcheable. i1000s
AC Current Clamp 3000 A (0.1 mV/A), 300 A (1 mV/A), and 30 A (10 mV/A)
switcheable. i3000s
AC/DC Current Clamp 100 A (10 mV/A) and 10 A (100 mV/A) switcheable. 80i-110s
AC/DC Current Clamp 400 A (1 mV/A) i410 and PM9082
AC/DC Current Clamp 600 A AC and 1000 A DC (1 mV/A) i1010 and PM9082
Service Manual (English) 4822 872 05392
Troubleshooting
Analyzer does not start up.
The battery may be completely empty. In this case the Analyzer will not start up, even if
it is powered by the Battery Charger/Power Adapter. Charge the battery first: power the
Analyzer with the Battery Charger without turning it on. Wait about 15 minutes and try
turning on the Analyzer again.
Analyzer shuts down after a few seconds.
The battery may be empty. Check the battery symbol in the screen header. The
symbol indicates that the battery is empty and must be charged.