Setting the time-out limit, Adf front offset setting, Adf back offset setting – FUJITSU fi-4750C User Manual

Page 77: Flatbed offset setting

7-8

6. Setting the time-out limit

1 Press “Next”

or “Previous”

and let the

scanner display Screen 46.

2 At Screen 46, press

to increase the

number or press

to decrease the time-out

limit. Then press

to activate the

setting.

NOTICE

Default is 30 seconds.

3 Press

to return.

7. ADF Front Offset Setting

8. ADF Back Offset Setting

9. Flatbed Offset Setting

1 Press “Next”

or “Previous”

and let the

scanner display the following:
• Front Offset by ADF : Screen 47.
• Back Offset by ADF : Screen 48.
• Offset of the Flatbed

: Screen 49.

2 At Screen 47, 48, or 49, select “Yes” by

pressing the

button, then press

. The scanner displays Screen A. (X =

7, 8, or 9)

3 At Screen A, if you want to let the offset

return to default, select “Yes” otherwise “No”
then press

. The scanner displays

Screen B.