FUJITSU fi-4750C - Manual (Page 66)

6-6
12 Select Back Halftone (when “Duplex” was
specified) by pressing or . The
parameters are the same as in step 11.
Press
to confirm. The scanner
displays Screen 10.
13 Select Front Document Type by pressing
or .
Front side (F) or Back side (B)
Density
Halftone
Line Art or Photo
Resolution
Portrait or Landscape
Paper size
Simplex (S) or Duplex (D)
Press to confirm. The scanner displays
Screen 11.
14 Select Back Document Type (when “Duplex”
was specified) by pressing or . The
parameters are the same as in step 13.
Press
to confirm. The scanner displays
Screen 12.
15 Confirm what you have specified.
If some parameter needs to change, press
or to select the corresponding
screen and re-select the parameter by
pressing
or and finally press .
If all parameters are acceptable, press
to return to the “Scanner Ready” screen.
Parameter Description
L. (Line)
White level following is ON. Top 3mm part of the document must be left blank
(grounding color is drop-out color). Use this specification for reading line arts or texts.
P. (Photo)
White level following is Off
Use this specification for reading photographs.