FUJITSU fi-4750C - Manual (Page 56)

5-1
Basic Product Specification
Notes *1: The details are described in chapter 4.
*2: The actual scanning speed might differ due to host computers’ environment.
*3: These speeds do not contain processing time at the host computer.
*4: The maximum number will differ due to the paper thickness. Refer to chapter 4.
*5: The scanning speed might be slow. The usage with NO COMPRESSION is recommended.
*6: Both SCSI-2 and the Third Party Slot can not be used at the same time.
*7: The Power consumption of the boards should be as follows:
- In the Low Power Mode: Less than 0.35 A
- With IPC-4D option:
Less than 1.5 A
- Without IPC-4D option: Less than 3.0 A
N
o
. Item Specification Rem arks
1 Operating method ADF (Duplex), Flatbed
2 Image sensor CCD x 2 Front/Back
3 Light source LED Lamp x 2 Green, Red, Blue
4 Document
Size Minimum A8 (Portrait)
Maximum A3/Double Letter
5 Document Thickness 52 g/m 2 (14 lb) to 127 g/m 2 (34 lb) Note *1
6 Optical Resolution 400 dpi
7 Output
Resolution
Binary 100/150/200/240/300/400/600/800 dpi
Grayscale
100/150/200/240/300/400/600 dpi Simplex
100/150/200 dpi Duplex
Color 100/150/200/240/300/400/600 dpi
8 Grayscale level (internal) 1024 levels (10 bits)
9 Scanning
Speed
(mechanical)
Note *2
Simplex
W hite binary
Unicolor binary
Color
50ppm, 200dpi, A4, Portrait
35ppm, 300dpi, A4, Portrait
64ppm, 200dpi, A4, Landscape
36ppm, 200dpi, A4, Portrait
16ppm, 200dpi, A4, Portrait
Note *3
Duplex
W hite binary
Unicolor binary
Color
90ipm, 200dpi, A4, Portrait
62ipm, 300dpi, A4, Portrait
114ipm, 200dpi, A4, Landscape
64ipm, 200dpi, A4, Portrait
24ipm, 200dpi, A4, Portrait
10 Halftone patterns Dither/Error diffusion
11 Capacity of ADF 100 sheets (A4, 64 g/m 2 (17 lb)) Note *4
12 Compression MH/MR/MMR Note *5
13 Interface
Note *6 SCSI-2 High Density (Half)
50-pin, Female
Third Party Slot Note *7