FUJITSU fi-4750C - Manual (Page 49)

4-3
Less than
3 mm
Feed direction
Top of the paper
Read surface
More than
30 mm
Feed direction
Less than
5 mm
More than
30 mm
Read surface
Top of the paper
CAUTION
As there is always a slight chance that a document may be damaged when using the ADF, important
original documents should never be fed through the ADF. Instead, read them manually in flatbed
mode.
NOTICES
1. When scanning a translucent document, set the density to light mode.
2. Carbonless papers have a chemical composition that damages the Pad and Pick roller. Therefore, note
the following:
Cleaning: If mispicks occur frequently, clean the Pad and Pick roller in accordance with
the “Cleaning and Maintenance” manual.
Replacement of parts: The life of the Pad and Pick roller may be shorter than if PPC paper
documents are fed.
3. The leading edge of all documents fed using the ADF should be straightened so the curl of the paper
meets the specifications shown below: