FUJITSU SCANSNAP NETWORK SCANNER N1800 - Manual (Page 8)

8
Chapter 1 Before Using the Scanner
1.1 From Arrival through
Operation
The following shows the flow from scanner arrival
through operation.
This manual provides information about Steps 1 to 5
shown below.
For information about Steps 6 to 9, refer to the manuals
downloaded in Step 5.
1.2 Checking the Components
Make sure that all items shown below are included in the
package. If any other packaging is provided, make sure
to store it as well. Make sure to handle the components
with care.
If anything is missing or damaged, contact your FUJITSU
scanner dealer or an authorized FUJITSU scanner
service provider.
1 Check package
D"1.2 Checking the Components" (page 8)
2 Setup scanner
D"Chapter 2 Setting up the Scanner" (page 10)
3 Configure scanner basic settings
D"Chapter 3 Configuring Scanner Basic Settings"
(page 11)
4 Check network connection
D"Chapter 4 Checking the Network Connection"
(page 15)
5 Download manual
D"Chapter 5 Downloading the Manual" (page 16)
6 Install Admin Tool
DRefer to the Operator's Guide.
7 Perform scan test
DRefer to the Operator's Guide.
8 Configure required settings for scanner use
DRefer to the Operator's Guide.
9 Operate scanner
DRefer to the Operator's Guide.
Scanner
ADF paper chute
AC cable
AC adapter
LAN cable (straight-through)
Carrier sheet
Getting Started (this manual)
Instruction
EULA Terms for Microsoft ®
Windows
®
XP Embedded and
Windows
®
Embedded Standard
End-User License Agreement
For Network Scanner ScanSnap
N1800 Embedded Software