FUJITSU SCANSNAP NETWORK SCANNER N1800 - Manual (Page 21)

21
Power Troubleshooting
■ Check item
Has the power button been pressed?
■ Action
Press the power button.
■ Check item
Are the AC cable and AC adapter properly
connected to the scanner?
■ Action
z Connect the AC cable and the AC adapter properly.
z Disconnect AC cable from the scanner to turn off the
scanner, and connect the cable again. After turning
the power off, wait for at least 10 seconds before
turning the power back on again.
If the problem persists even after taking the above
mentioned actions, contact your FUJITSU scanner
dealer or an authorized FUJITSU scanner service
provider.
Login Troubleshooting
■ Check item
Was the Caps Lock on when the password
was entered?
■ Action
Turn off the Caps Lock and try logging in again.
If the password has been lost or forgotten, contact your
FUJITSU scanner dealer or an authorized FUJITSU
scanner service provider.
Scanner cannot be turned on. Cannot login with administrator
password.