Hs140/150-010 model, Figure21. model hs140-010 base model with an hs, Hs140/150-100 model – Hitachi US7070447-001 User Manual
Page 20: Hs140/150-010 model -4, Hs140/150-100 model -4, Figure 2-1, Hispeed switch troubleshooting guide, Console port, Reset button/power led, Onboard module
HiSpeed Switch Troubleshooting Guide
2-4
US7070447-001, Rev 01
Draft Level—Hitachi Confidential
HS140/150-010 Model
The -010 models ship with a sixteen port module configured in the captive slot.
This module can consist of 10BASE-TX, 10/100BASE-TX or 100BASE-FX type
ports and can be configured with either all one type of port or a combination of
three types of ports. The expansion slot is capable of accepting an additional 16
ports for a total of 32 ports per switch.
Figure 2-1 shows an HS140-010 switch model with the expansion slot populated
by an HS-150-010-16E (12 10BASE-T ports and four 10/100BASE-TX ports)
expansion module and no uplink capability.
Key:
➀
Console port
➁
Reset button/Power LED
➂
Onboard module
➃
Expansion module
Figure 2-1.
Model HS140-010 base model with an
HS-150-010-16Eexpansion module installed
HS140/150-100 Model
The -100 models ship with an eight port module configured in the captive slot.
This module can consist of either eight ports of 10/100BASE-TX or eight ports of
100BASE-FX type ports. The expansion slot is capable of accepting an additional
8 ports for a total of 16 ports per switch.
Figure 2-2 shows an HS150-100 model with an 8-port TX expansion module (no
uplink module installed).
10 BASE-T
10/100 BASE-T
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Console
HiSpeed NETWORK SWITCH
10 BASE-T
2
4
10/100 BASE-T
5
1
3
6
7
8
9
10
11
12
13
14
15
16
100FX
100FX
➁
➂
➃
➀