Vivotek SD9161-H-v2 2MP PTZ Network Dome Camera - Manual (Page 423)

VIVOTEK
User's Manual - 423
© 2022 VIVOTEK INC. All Right Reserved
272
8.8 ePTZ Recall (capability_eptz > 0 and capability_fisheye = 0)
Note: This request requires camctrl privileges.
Method: GET/POST
Syntax:
http://<
servername >/cgi-bin/camctrl/eRecall.cgi?channel=&stream=&
recall=[&return= ]
PARAMETER
VALUE DESCRIPTION
channel <0~(n-1)> Channel of the video source.
stream <0~(m-1)> Stream.
recall Text string less than
40 characters One of the present positions to recall.
return Redirect to the page after the parameter is
assigned. The should be the relative path
according to the root of camera. If you omit this
parameter, it will redirect to an empty page.
* If the is invalid path, it will ignore this
parameter.
8.9 ePTZ Preset Locations (capability_eptz > 0 and
capability_fisheye = 0)
Note: This request requires Operator privileges.
Method: GET/POST
Syntax:
http://<
servername >/cgi-bin/operator/ePreset.cgi?channel=&stream=
[&addpos=][&delpos=][&return= ]
PARAMETER
VALUE DESCRIPTION
channel <0~(n-1)> Channel of the video source.
stream <0~(m-1)> Stream.
© 2022 VIVOTEK INC. All Right Reserved
273
PARAMETER VALUE DESCRIPTION
addpos 40 characters> Add one preset location to the preset list.
delpos 40 characters> Delete preset location from the preset list.
return Redirect to the page after the parameter is
assigned. The should be the relative path
according to the root of camera. If you omit this
parameter, it will redirect to an empty page.
* If the is invalid path, it will ignore this
parameter.
8.10 IP Filtering for ONVIF
Syntax:
http://< servername >/cgi-bin/admin/ipfilter.cgi?type[=]
http://< servername >/cgi-bin/admin/ipfilter.cgi?method=add&ip= [&index=
ue>][&return=< return page >]
http://< servername >/cgi-bin/admin/ipfilter.cgi?method=del&index=[&return=< retu
rn page >]
PARAMETER
VALUE DESCRIPTION
type NULL Get IP filter type
allow, deny Set IP filter type
method addv4 Add IPv4 address into access list.
addv6 Add IPv6 address into access list.
delv4 Delete IPv4 address from access list.
delv6 Delete IPv6 address from access list.
ip Single address:
Network address:
Range address:
index The start position to add or to delete.
8.11 UART HTTP Tunnel Channel (capability_nuart > 0)
Note: This request requires Operator privileges.
Method: GET and POST