Vivotek SD9161-H-v2 2MP PTZ Network Dome Camera User Manual

Page 24

VIVOTEK

24 - User's Manual

In-ceiling Mount - Mount Option C

C-1. The in-ceiling mount bracket is separately purchased. Apply the alignment sticker to a

preferred location. Drill a hole that is 200mm in diameter. The maximum board thickness is

63mm. Make sure the ceiling board can stand the weight of the camera (1.2kgs).

C-2. Secure the included clamping arms to the sides of the camera. When doing this, use the

included foam block to help avoid scratch and damage.

Ø200mm

63mm

Up to

Ceiling Hole Template Sticker

260mm