1 video input setting per channel – Vivotek SD9161-H-v2 2MP PTZ Network Dome Camera User Manual

Page 212

VIVOTEK

212 - User's Manual

NAME

VALUE

SECURITY
(get/set)

DESCRIPTION

re_maxrange" != "-"
* Only valid when
"piris_mode"=manual or
"irismode"=fixed
* Only available when
"capability_image_c<0~(n-1)>_exposu
re_rangetype" is "twovalues".
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.

enablepreview

1/4

Usage for UI of exposure settings.
Preview settings of video profile.
* Only available when
"capability_image_c<0~(n-1)>_exposu
re_mode" !=0
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.

7.8.1

Video Input Setting per Channel

Group:

videoin_c<0~(n-1)>

for n channel products, and m is stream number

n denotes the value of "capability_nvideoin", m denotes the value of "capability_nmediastream"

NAME

VALUE

SECURITY(
get/set)

DESCRIPTION

cmosfreq

50, 60

4/4

CMOS frequency.
* Only available when "
capability_videoin_type " is 2

mode

0 ~
"capability_videoin_c<0~(
n-1)>_nmode"-1

4/4

Indicate the video mode on use.

whitebalance

auto,

4/4

Modes of white balance.