Vivotek SD9161-H-v2 2MP PTZ Network Dome Camera User Manual

Page 108

VIVOTEK

108 - User's Manual

Two way audio port

The Network Camera supports two way audio communication so that operators can transmit and receive

audio simultaneously. By using the Network Camera’s built-in or external microphone and an external

speaker, you can communicate with people around the Network Camera.

Note that as JPEG only transmits a series of JPEG images to the client, to enable the two-way audio

function, make sure the video mode is set to H.264 on the Media > Video > Stream settings page and

the media option is set to “Media > Video > Stream settings” on the Client Settings page. Please refer to

SIP

SIP is short for Session Initiation Protocol. If necessary, you can change the default port number, 5060,

to one between 1025 and 65535.

Audio transmitted from operators

Audio transmitted to operators

America

Taiwan