Get server parameter values – Vivotek SD9161-H-v2 2MP PTZ Network Dome Camera User Manual
Page 183
VIVOTEK
User's Manual - 183
©
2022 VIVOTEK INC. All Right Reserved
32
5.
Get Server Parameter Values
Note:
The access right depends on the URL directory.
Method:
GET/POST
Syntax:
http://<
servername
>/cgi-bin/
anonymous
/getparam.cgi?[
]
[&
http://<
servername
>/cgi-bin/
viewer
/getparam.cgi?[
]
[&
http://<
servername
>/cgi-bin/
operator
/getparam.cgi?[
]
[&
http://<
servername
>/cgi-bin/
admin
/getparam.cgi?[
]
[&
Where the
should be
[_
] or
[.
]. If you do not specify
any parameters, all the parameters on the server will be returned. If you specify only
, the
parameters oftherelated group will be returned.
When querying parameter values, the current parameter values are returned.
A successful control request returns parameter pairs as follows:
Return:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length:
\r\n
where
[
Example
: Request IP address and its response
Request:
©
2022 VIVOTEK INC. All Right Reserved
33
http://192.168.0.123/cgi-bin/admin/getparam.cgi?network_ipaddress
Response:
HTTP/1.0 200 OK\r\n
Content-Type: text/html\r\n
Context-Length: 33\r\n
\r\n
network.ipaddress=192.168.0.123\r\n