Vivotek SD9161-H-v2 2MP PTZ Network Dome Camera - Manual (Page 137)

VIVOTEK
137 - User's Manual
Positions on the Home page
The Preset positions will also be displayed on the home page. Select one from the Go to drop-down
list, and the Network Camera will move to the selected position.
Pan button: Click this button to start the 360 ° horizontal auto pan.
Patrol button: Click this button, then the Network Camera will patrol continuously among the selected
positions. You can select to perform a Preset patrol or a Recorded tour patrol.
Pan button
Patrol button
PTZ > Calibrate
This function re-calibrates the home position to the default center to recover any displacement caused by
external forces. Please note that there is no confirm message after using the function, and the calibration
immediately takes place. If, after a long use, a user finds it is difficult to move camera’s field of view to a
specific point, use this function to restore the camera’s orginal coordinates in pan and tilt motions.
You can use the Save button to save the current position as Home, as a preset, or to the existing preset.