Kramer 4x4 Audio and Dante Mixer - Manual (Page 46)

Kramer Electronics Ltd.
FC-404NETxl – Protocol 3000 44
Function Description Syntax Parameters/Attributes Example
X-MIX-
MUTE? Get Matrix cross-point
mute syntax.
This is an Extended
Protocol 3000
command.
COMMAND
#X-MIX-MUTE?  OUT . . . .
, IN . . . .
>
FEEDBACK
~nn@X-MIX-MUTE  OUT . . .
> . , IN . . . .
ex>,
The following attributes comprise
the signal ID:
▪ –
Direction of the port:
o IN – Input
o OUT – Output
▪ – Type of
signal on the port:
o ANALOG_AUDIO
o DANTE
▪ port_index> – The port
number as printed on the front
or rear panel: 1 to 4 for analog
audio, and 1 for Dante
▪ signal_type> – Signal ID
attribute:
o AUDIO
▪ – Indicates a specific
channel number when there
are multiple channels of the
same type: 1 to 4 for Dante,
and 1 for Analog audio
–
o ON=1
o OFF=0
Get mute status of analog
audio output 1 and Dante
audio cross-point 3:
#X-MIX-MUTE?
 OUT.ANAL
OG_AUDIO.1.AUDIO.1,IN
.DANTE.1.AUDIO.3
X-MUTE Set mute ON/OFF on a
specific signal.
This command is
designed to Mute a
Signal. This means that
it could be applicable
on any type of signal.
Could be audio, video
and maybe IR, USB or
data if this capability is
supported by the
product.
This is an Extended
Protocol 3000
command.
COMMAND
#X-MUTE  . . .
. , state
FEEDBACK
~nn@X-MUTE  . . .
. , state
The following attributes comprise
the signal ID:
▪ –
o IN
o OUT
▪ –
o ANALOG_AUDIO
o ANALOG_JACK
o DANTE
▪ < port_index> – The port
number as printed on the front
or rear panel: 1 to 4 for analog
audio, and 1 for Dante
▪ – Signal ID
attribute:
o AUDIO
– Indicates a specific
channel number when there are
multiple channels of the same type:
1 to 4 for Dante, and 1 for Analog
audio
state – OFF/ON (not case
sensitive)
Mute the Dante OUT 4:
#X-MUTE  out . dante . 1 . a
udio . 4 , on
X-MUTE? Get mute ON/OFF state
on a specific signal.
This command is
designed to Mute a
Signal. This means that
it could be applicable
on any type of signal.
Could be audio, video
and maybe IR, USB or
data if this capability is
supported by the
product.
This is an Extended
Protocol 3000
command.
COMMAND
#X-MUTE?  . . .
.
FEEDBACK
~nn@X-MUTE  . . .
. , state
The following attributes comprise
the signal ID:
▪ –
o IN
o OUT
▪ –
o ANALOG_AUDIO
o ANALOG_JACK
o DANTE
▪ < port_index> – The port
number as printed on the front
or rear panel: 1 to 4 for analog
audio, and 1 for Dante
▪ – Signal ID
attribute:
o AUDIO
– Indicates a specific
channel number when there are
multiple channels of the same type:
1 to 4 for Dante, and 1 for Analog
audio
state – OFF/ON (not case
sensitive)
Get the mute ON/OFF state
on a specific signal:
#X-MUTE?  out . analog_a
udio . 4 . audio . 1
X-PRST-
CURR? Get the current preset
loaded per type.
To get the list of preset
types existing in your
product use the
command:
X-PRST-TYPES?
This is an Extended
Protocol 3000
command.
COMMAND
#X-PRST-CURR?  preset_type
FEEDBACK
~nn@X-PRST-
CURR

▪ preset_type –
o System Preset –
IOCONFIG.SYSTEM
▪ –preset index
▪ – the name of the
preset in URL encode format
▪ –
o ON
o OFF
Get current mixer preset:
X-PRST-
CURR?
 IOCONFIG.SYSTEM