Connecting the outputs, Connecting to fc-404netxl via rs-232 – Kramer 4x4 Audio and Dante Mixer User Manual
Page 10
Kramer Electronics Ltd.
FC-404NETxl
– Connecting FC-404NETxl
8
Connecting the Outputs
Your
FC-404NETxl
is provided with a 3-pin terminal block for each output channel. This
connector offers a balanced output to interface with the input of another device.
Connection methods for balanced and unbalanced outputs are identical as the methods for
inputs as referenced in
Connecting to FC-404NETxl via RS-232
You can connect to
FC-404NETxl
via an RS-232 connection
using, for example, a PC.
FC-404NETxl
features an RS-232 3-pin terminal block connector allowing the RS-232 to
control
FC-404NETxl
.
Connect the RS-232 terminal block on the rear panel of
FC-404NETxl
to
a PC/controller, as
follows:
From the RS-232 9-pin D-sub serial port connect:
•
Pin 2 to the TX pin on the
FC-404NETxl
RS-232 terminal
block
•
Pin 3 to the RX pin on the
FC-404NETxl
RS-232 terminal
block
•
Pin 5 to the G pin on the
FC-404NETxl
RS-232 terminal block
RS-232 Device FC-404NETxl
13