Kramer 4x4 Audio and Dante Mixer - Manual (Page 24)

Kramer Electronics Ltd.
FC-404NETxl – Using Embedded Webpages 22
Adjusting Audio Parameters
You can mute/unmute any of the inputs and outputs (as well as the monitor output) and adjust
additional audio parameters.
Adjusting Analog Audio Input Parameters
To adjust analog input parameters:
1. In the Navigation pane, click Mixer . The Mixer page appears.
2. Perform the following actions:
▪ Move the fader to adjust the audio input level.
▪ Toggle / to mute / unmute the input audio, respectively.
▪ Click to select audio line in. (Analog inputs only).
▪ Click to select dynamic microphone and to select condenser microphone (the
title IN changes to MIC). (Analog inputs only).
Input parameters are adjusted.
Figure 25: Mixer Page – Processing Analog Audio Input Figure 26: Mixer Page – Processing Dante Input