Kramer 4x4 Audio and Dante Mixer - Manual (Page 44)

Kramer Electronics Ltd.
FC-404NETxl – Protocol 3000 42
Function Description Syntax Parameters/Attributes Example
X-LABEL Set the port label.
Labels are used
commonly by WEB
pages.
This is an Extended
Protocol 3000
command.
COMMAND
#X-LABEL  . .
, label_txt
FEEDBACK
~nn@X-LABEL  . .
, label_txt
The following attributes comprise
the port ID:
▪ –
Direction of the port:
o IN
o OUT
▪ – Type of
signal on the port:
o ANALOG_AUDIO
o ANALOG_JACK
o DANTE
▪ – The port
number as printed on the front
or rear panel: 1 to 4 for analog
audio, and 1 for Dante
▪ signal_type> – Signal ID
attribute:
o AUDIO
▪ – Indicates a specific
channel number when there
are multiple channels of the
same type: 1 to 4 for Dante,
and 1 for Analog audio
label_txt – ASCII characters
Set the port label (for analog
audio 1)
to “Player”:
#X-LABEL  in . analo_aud
io . 1 . analog_audio . 1 , P
layer
X-LABEL? Get the port label.
Labels are used
commonly by WEB
pages.
This is an Extended
Protocol 3000
command.
COMMAND
#X-LABEL?  . .
FEEDBACK
~nn@X-LABEL  . .
, label_txt
The following attributes comprise
the port ID:
▪ –
Direction of the port:
o IN
o OUT
▪ – Type of
signal on the port:
o ANALOG_AUDIO
o ANALOG_JACK
o DANTE
▪ – The port
number as printed on the front
or rear panel: 1 to 4 for analog
audio, and 1 for Dante
▪ signal_type> – Signal ID
attribute:
o AUDIO
▪ – Indicates a specific
channel number when there
are multiple channels of the
same type: 1 to 4 for Dante,
and 1 for Analog audio
label_txt – ASCII characters
Get the port label (for Dante
output 4):
#X-LABEL?  out . dante . 1
. audio . 4
X-MIC-
TYPE Set microphone type.
This is an Extended
Protocol 3000
command.
COMMAND
#X-MIC-TYPE  . .
, mic_type
FEEDBACK
~nn@X-MIC-TYPE  . .
. . , mic_type
The following attributes comprise
the port ID:
▪ –
Direction of the port:
o IN
▪ – Type of
signal on the port:
o ANALOG_AUDIO
▪ – The port
number as printed on the front
or rear panel: 1 to 4
▪ signal_type> – Signal ID
attribute:
o AUDIO
▪ – Indicates a specific
channel number when there
are multiple channels of the
same type: 1
mic_type – Dynamic/Condenser
(not case sensitive)
Set analog audio mic 3 type
to condenser:
#X-MIC-TYPE  in . analog
_audio . 3 , condenser
>
X-MIC-
TYPE? Get microphone type.
This is an Extended
Protocol 3000
command.
COMMAND
#X-MIC-TYPE?  . .
FEEDBACK
~nn@X-MIC-TYPE  . .
, mic_type
The following attributes comprise
the port ID:
▪ –
Direction of the port:
o IN
▪ – Type of
signal on the port:
o ANALOG_AUDIO
▪ – The port
number as printed on the front
or rear panel: 1 to 4
▪ signal_type> – Signal ID
attribute:
o AUDIO
▪ – Indicates a specific
channel number when there
are multiple channels of the
same type: 1
mic_type – Dynamic/Condenser
(not case sensitive)
Get the microphone type for
analog audio 1 input:
#X-MIC-TYPE?  in . analo
g_audio . 1