Kramer 4x4 Audio and Dante Mixer - Manual (Page 25)

Kramer Electronics Ltd.
FC-404NETxl – Using Embedded Webpages 23
Adjusting Output Parameters
To adjust Dante input and the output parameters:
1. In the Navigation pane, click Mixer . The Mixer page appears.
2. Perform the following actions:
▪ Move the fader to adjust the audio output level.
▪ Toggle / to mute / unmute the output audio, respectively.
Figure 27: Mixer Page – Processing Analog/Dante Audio Output
Output parameters are adjusted.
Configuring System Presets
FC-404NETxl includes 10 presets: the default preset and 9 other presets (System2 to
System10). By default, all the presets are set to the default configuration.
To Configure a system preset:
1. In the Navigation pane, click AV . The AV page appears.
Figure 28: A/V Settings Page
2. In the System Preset drop-down box, select a preset and click LOAD .
The current preset is loaded.
When loading a preset for the first time, the default configuration is loaded.