Setting cross-point volume – Kramer 4x4 Audio and Dante Mixer User Manual
Page 21
Kramer Electronics Ltd.
FC-404NETxl
– Using Embedded Webpages
19
Setting Cross-Point Volume
Set the cross-point volume separately for each in-out connection.
To set the cross-point volume:
1. In the Navigation pane, click
Matrix
. The Matrix page appears.
2. Click the volume area (0dB, by default).
The volume window appears.
Figure 21: Matrix Page
– Setting Cross-Point Volume
3. Set the cross-point volume (using the knob or entering the value and pressing
Enter
on
your keyboard). The cross-point volume is set and appears at the cross-point.
Figure 22: Cross-Point Volume Value