Panasonic AV-HS6000 2 M/E Live Switcher Main Frame & Control Panel (Dual Redundant Power Supplies) - Manual (Page 179)

– 179 –
Chapter 11 Specifications — Specifications
to
terminals
During Standard mode
16 lines (two distribute outputs per line)
f Connectors: BNC × 32
f ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, ME2KEYPVW, DSKPGM1, DSKPGM2,
DSKPVW1, DSKPVW2, DSK1CLN, DSK2CLN, DSK3CLN, DSK4CLN, SEL KEYPVW, MV1 to MV4, and AUX1 to
AUX16 can be assigned.
HD-SDI HD serial digital, SMPTE292M (BTA S-004) standard compliant
f Output level: 0.8 V [p-p] ±10%
f Rise time: Less than 270 ps (HD)
f Fall time: Less than 270 ps (HD)
f Difference between rise time and fall time: 100 ps or less (HD)
f Alignment jitter: 0.2 UI (130 ps) or less (HD)
f Timing jitter: 1.0 UI or less (HD)
f Eye aperture ratio: 90% or more
f DC offset: 0±0.5 V
SD-SDI SD serial digital, SMPTE259M standard compliant
f Output level: 0.8 V [p-p] ±10%
f Rise time: 1.5 ns or less
f Fall time: 1.5 ns or less
f Difference between rise time and fall time: 0.5 ns or less
f Jitter: 0.2 UI or less
During 3G mode
3G-SDI output: Eight lines (two distribute outputs per line)
HD-SDI output: Two lines (two distribute outputs per line)
f Connector
3G-SDI: BNC
× 16(odd numbered terminals only)
HD-SDI: BNC × 4 ( and terminals only)
f 3G-SDI signal is not output from the even numbered terminals.
- No signal is output from the , ... terminals.
- The HD-SDI signal converted to the 1080i format is output from the and terminals. This
signal is converted to the 1080i format by decimating the 1080p signal output from the and
15> terminals.
f and terminals are equipped with color correctors. The same color corrector setting is also
applied to and terminals.
f ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, DSKPGM1, DSKPGM2, DSKPVW1,
DSKPVW2, DSK1CLN, DSK2CLN, SEL KEYPVW, MV1 to MV2, and AUX1 to AUX8 can be assigned.
During 4K mode
4K signal output: Three lines (two distribute outputs per line)
2K signal output: Two lines (two distribute outputs per line)
f Connector
3G-SDI (for 4K signal): BNC
× 24 (terminal number 1 to 12)
3G-SDI (for 2K signal): BNC × 4 (terminal number 13 and 15)
HD-SDI (for 2K signal): BNC × 4 (terminal number 14 and 16)
f The 4K signal is output in SQD format.
f The HD-SDI signal converted to the 1080i format is output from the and terminals.
This signal is converted to the 1080i format by decimating the 1080p signal output from the and
OUT 15> terminals.
f ME1PGM, ME1PVW, ME1CLN, ME1KEYPVW, ME2PGM, ME2PVW, ME2CLN, DSKPGM1, DSKPGM2, DSKPVW1,
DSKPVW2, DSK1CLN, DSK2CLN, SEL KEYPVW, MV1 to MV2, and AUX1 to AUX8 can be assigned.
3G-SDI 3G serial digital, SMPTE424M standard compliant
f Output level: 0.8 V [p-p] ±10%
f Rise time: 135 ps or less
f Fall time: 135 ps or less
f Difference between rise time and fall time: 50 ps or less
f Alignment jitter: 0.3 UI or less
f Timing jitter: 2.0 UI or less
f DC offset: 0±0.5 V
f 3G-SDI Level B
Signal formats SD 480/59.94i, 576/50i
HD 1080/59.94i, 1080/50i, 720/59.94p, 720/50p, 1080/29.97PsF, 1080/25PsF,
1080/24PsF, 1080/23.98PsF
3G 1080/59.94p, 1080/50p
4K 2160/59.94p, 2160/50p
Signal processing Y:P
B
:P
R
4:2:2 10 bits
R:G:B 4:4:4 8 bits
ME number 2ME